1. It is used for lifting 5t~50t stuff;
2. It has beautiful box-typed welded main girders. Computer-optimized design for main girders with good performance and lightweight;
3. Compact structure, lightweight and high lifting height;
4. The Max. span reaches 32 meters;
5. It's widely used in workshops, metallurgy, warehouses and assembly shops etc.
1. Power supply through step less slide lines;
2. Lifting mechanisms and traveling mechanisms are mutually independent and could travel at the same time;
3. Control panel protection degree is IP54;
4. Reasonable components installation, convenient for check and maintenance;
5. Electric cable is suspended in cable saddle, stationary cable trolley which slides on a galvanized C-type steel;
|
Lifting Capacity(t) |
Span (m) |
lifting height (m) |
working duty |
lifting speed (m/min) |
crane traveling speed (m/min) |
trolley traveling speed (m/min) |
total power |
|
15 |
22.5~31.5 |
16 |
A6 |
13.2 |
36.7 |
101.4 |
63 |
|
A7 |
15.8 |
36.6 |
103.9 |
79.5 |
|||
|
20 |
16 |
A6 |
12.6 |
36.2 |
89 |
71 |
|
|
15 |
A7 |
15.8 |
42.8 |
103.9 |
94.5 |
||
|
32 |
15 |
A6 |
12.5 |
37 |
87.3 |
111.3 |
|
|
16 |
A7 |
15.1 |
43.3 |
104.3 |
135.5 |
||
|
40 |
16 |
A6 |
11.7 |
37.5 |
87.3 |
128.5 |
|
|
A7 |
15.3 |
43.2 |
113.9 |
173 |
Overload limiter, limit switch (lifting and traveling), interlocking protection devices, buffer, track sweep plate, shield, bus bar protection board, anti-collision device, main disconnecting switch, emergency stop system and motor overload protection.
| Lifting Capacity(t) | Span (m) | lifting height (m) | working duty | lifting speed (m/min) | crane traveling speed (m/min) | trolley traveling speed (m/min) | total power |
| 15 | 22.5~31.5 | 16 | A6 | 13.2 | 36.7 | 101.4 | 63 |
| A7 | 15.8 | 36.6 | 103.9 | 79.5 | |||
| 20 | 16 | A6 | 12.6 | 36.2 | 89 | 71 | |
| 15 | A7 | 15.8 | 42.8 | 103.9 | 94.5 | ||
| 32 | 15 | A6 | 12.5 | 37 | 87.3 | 111.3 | |
| 16 | A7 | 15.1 | 43.3 | 104.3 | 135.5 | ||
| 40 | 16 | A6 | 11.7 | 37.5 | 87.3 | 128.5 | |
| A7 | 15.3 | 43.2 | 113.9 | 173 |
1. box-type shaped by wielding;
2. High-quality carbon steel Q235B and Q345B;
3. the girder connected by high strength screws;
4. Welding seams are tested by X-ray and ultrasound;
5. Forged wheels;
6. Compact structure, small volume and lightweight trolley;
7. The lifting mechanism is open type winch trolley;
8. Compact reducer motor drive, step-less control, hardened gears and safety disc brake;
9. Good operation performance, step-less speed regulating and running smoothly;
10. Main girders Shot blasting sa2.5 after welding to release internal stresses;
11. Painting high-quality epoxy zinc-rich primer, and the thickness of oil film is 140μm;